Infrascan Thermal Imaging
0490 928 158
  • Home
  • Why Sydney Thermal Imaging?
    • Testimonials
  • Certificates of Currency
  • Procedure
  • Gallery
  • Residual Current Devices
    • Residual Current Devices
    • PAT (Portable Appliance Testing) and Current NSW Legislation and Compliance
  • Services
    • Electrical Thermal Imaging
    • Thermographic Scanning
    • Thermal Imaging
    • Power monitoring
    • Test and Tag
    • RCD Testing
    • Ground penetrating radar
    • High Temperature Scanning
  • Regulations
  • Contact

More Than Thermal Imaging

Comprehensive Reports

InfraScan quality control procedure means we report on more than thermal imaging anomalies.

The following is a a potentially dangerous situation. The annotated picture is self explanatory. 

The escutcheon was scuffing the cable insulation whenever it was removed. At some point an electrician would be electrocuted if left unreported.
Serious Fault

Oxidation on dormant (cold) electrical switchboards
Our procedure is to check every switch board for Oxidation - even if cold or dormant.
Note Oxidation

IP Rating

Reccomendations are made 
Replace In-Fill Parts to Maintain IP Rating
Replace Fuse covers to maintain IP rating
Replace fuse links to maintain IP rating
Condensation inside panel
Perforated rust

Sydney Thermal Imaging
Pty Ltd

What Our Customers Have to Say

Very good reports , thank you. I’m going to have a bit of work following on from them! Thanks again
EM
Operations engineer 

Thank you very much, your prompt, no fuss attention to our 6 monthly scans is an FM's delight.
JM
Facilities Manager 


Sydney Thermal Imaging © 2025 All Rights Reserved
SEO Services by Logical Assembly